automatic hydraulic uncoiler for roll forming machine

一．5 ton hydraulic uncoiler parameters：

1. Main engine volume：8*1.7*2m
2. Main engine weight:about 2.3t
3. Frame:The base is made of 300H GB I-beam steel, and the box is welded with 14mm thick steel plate
4. Main engine spindle:Thick wall seamless steel pipe made by car,Axle diameter 194*45mm
5. Bolting spindle:It is composed of 1.4 meters, 20mm thick and 4 supporting arms.Which is upper milled by a support arm by a through key (depth 4-6mm)
6. Hydraulic pump station:3kw supermotor, plunger pump, 4 solenoid valve, Beijing Huade Pump valve, plus pressure protection, 380V
7. Rated power of main motor:5kw speed regulating motor, cycloidal reducer (with 6# reducer head) Shandong Aoli brand, plus electronic control (JD1A-40 electromagnetic speed regulating motor controller) Nanjing brand speed regulating table
8. Hydraulic cylinder:Winder cylinder diameter 125mm, one
9. Tightening mode:Slant type tightening: four brace wall brace
10. Hydraulic pressure arm is added on the upper side of the main engine, and the partition plate (16 pieces)
11. The main engine is equipped with starting damping (feed width 0-1.4m). The damping is equipped with 16 partition plates
12. Winding inside diameter:470-530mm
13. Rated bearing capacity8t
14. Receiving width 0-900mm, receiving thickness≤0mm
15. Receiving materials can receive 15 strips (width can be adjusted)
16. 15 pieces can be guaranteed when the equipment receives materials, and each piece receives materials neatly.Ensure the material roll is compact

• Parameters of 5 ton unloading trolley

1. Trolley lift:Double cylinder, cylinder diameter 90mm, stroke 220mm
2. Trolley forward:Model 350 hydraulic motor
3. Trolley discharge:The length of the panel is 1.35m, and the width of the panel is 900mm
4. Trolley track: Width 950mm, length 2500mm

Trolley stroke:Height stroke: 400mm, length stroke: 2500mm