5 ton hydraulic uncoiler parameters：
- Main engine volume：8*1.7*2m
- Main engine weight:about 2.3t
- Frame: 300H GB I-beam steel, 14mm thick steel plate weld the box
- Main engine spindle:Thick wall seamless steel pipe made by car,Axle diameter 194*45mm
- Bolting spindle:It is composed of 1.4 meters, 20mm thick and 4 supporting arms.Which is upper milled by a support arm by a through key (depth 4-6mm)
- Hydraulic pump station:3kw supermotor, plunger pump, 4 solenoid valve, Beijing Huade Pump valve, plus pressure protection, 380V
- Rated power of main motor:5kw speed regulating motor, cycloidal reducer (with 6# reducer head) Shandong Aoli brand, plus electronic control (JD1A-40 electromagnetic speed regulating motor controller) Nanjing brand speed regulating table
- Hydraulic cylinder:Winder cylinder diameter 125mm, one
- Tightening mode:Slant type tightening: four brace wall brace
- Hydraulic pressure arm adds on the upper side of the main engine, and the partition plate (16 pieces)
- The main engine is equipped with starting damping (feed width 0-1.4m). 16 partition plates
- Winding inside diameter:470-530mm
- Rated bearing capacity8t
- Receiving width 0-900mm, receiving thickness≤0mm
- Receiving materials can receive 15 strips
- the equipment receives materials guarantes 15 pieces, and each piece receives materials neatly.Ensure compact the material roll
Parameters of 5 ton unloading trolley
- Trolley lift:Double cylinder, cylinder diameter 90mm, stroke 220mm
- Trolley forward:Model 350 hydraulic motor
- Trolley discharge:The length of the panel is 1.35m, and the width of the panel is 900mm
- Trolley track: Width 950mm, length 2500mm
5.Trolley stroke:Height stroke: 400mm, length stroke: 2500mm
We not only produce customized 5 tons hydraulic uncoiler with trollery, but also some other 3-ton, 8-ton and 10-ton hydraulic decoilers, and some common loading racks
https://www.mtrollformingmachine.com/product/metal-roof-tile-…-forming-machine/
