一．5 ton hydraulic uncoiler parameters：
- Main engine volume：8*1.7*2m
- Main engine weight:about 2.3t
- Frame:The base is made of 300H GB I-beam steel, and the box is welded with 14mm thick steel plate
- Main engine spindle:Thick wall seamless steel pipe made by car,Axle diameter 194*45mm
- Bolting spindle:It is composed of 1.4 meters, 20mm thick and 4 supporting arms.Which is upper milled by a support arm by a through key (depth 4-6mm)
- Hydraulic pump station:3kw supermotor, plunger pump, 4 solenoid valve, Beijing Huade Pump valve, plus pressure protection, 380V
- Rated power of main motor:5kw speed regulating motor, cycloidal reducer (with 6# reducer head) Shandong Aoli brand, plus electronic control (JD1A-40 electromagnetic speed regulating motor controller) Nanjing brand speed regulating table
- Hydraulic cylinder:Winder cylinder diameter 125mm, one
- Tightening mode:Slant type tightening: four brace wall brace
- Hydraulic pressure arm is added on the upper side of the main engine, and the partition plate (16 pieces)
- The main engine is equipped with starting damping (feed width 0-1.4m). The damping is equipped with 16 partition plates
- Winding inside diameter:470-530mm
- Rated bearing capacity8t
- Receiving width 0-900mm, receiving thickness≤0mm
- Receiving materials can receive 15 strips (width can be adjusted)
- 15 pieces can be guaranteed when the equipment receives materials, and each piece receives materials neatly.Ensure the material roll is compact
